5.8 GHz Digital Wireless Speaker Kit, Model 1600



5.8 GHz Digital Wireless Speaker Kit, Model 1600

The Model 1600 wireless speaker kit will untie your speakers. No more running long speaker cables. Set up your home theater rear speakers or install speakers in another room without a big cabling project. The Model 1600 comes with two separate 150-Watt wireless receivers for each speaker.

The transmitter will send the music at 5.8 GHz to the wireless receivers up to 200 feet. You will enjoy true CD quality with uncompressed digital wireless audio. Each receiver has a mono speaker amplifier built in and connects directly to any passive loudspeaker. The built-in amplifiers deliver the efficiency of conventional class-D amplifiers while at the same time delivering far lower audio distortion.

Each wireless receiver measures only 5 x 3.5 x 2 inches and can easily be mounted to a speaker.



Features:


True CD-quality wireless

The Model 1600 wireless speaker kit utilizes advanced uncompressed wireless audio transmission to achieve true CD quality. Due to the low latency the signal from the wireless speaker kit is virtually free of any delay and the wireless speakers will be in perfect sync.

State-of-the-art digital amplifier

Each energy-efficient wireless amplifier provides 150 Watts per channel at a distortion of only 0.04 % for audiophile music playback. Due to the amplifier's high efficiency, no cooling is required and all you will hear is the music.

Transmit any audio signal

The Model 1600 transmitter can connect to virtually any audio source. Connect the transmitter directly to amplified speaker outputs of your home-theater receiver to make your rear speakers wireless or connect to the RCA output of your DVD or to the sound card of your computer. With it's volume control the transmitter can adjust to any audio source and offer it's full dynamic range.

Simple setup

Setting up your Model 1600 is incredibly easy. No technical or wiring expertise is required. And no need to run long speaker wires or break through walls or rewire your house. Each wireless amplifier measures 5 x 3.5 x 2 inches only and easily mounts to a speaker. Add any number of additional wireless amplifiers in other rooms.


Specification


Wireless Transmitter

Audio transmissionDigital
Transmitter frequency5.8 GHz
Error correction1/2 rate FEC
Transmitted data rate3 Mbps
Operating rangeMax. 200 ft. (60 m) line of sight, max. 50 ft. (20 m) through walls
 
 
Wireless Receiver

Output power2 x 150 W (2 x 80 Wrms)
Frequency response2 Hz ... 23 kHz
Signal-to-noise ratio91 dB
Total harmonic distortion (THD+N)0.04 %
Overall audio latency< 1 ms
Power efficiency90 %
Channel separation94 dB


 
CopyRight 2017 @ iuworld.net. iuworld.net - Infinite Ideas, Advance Lifestyle