Aeon Labs Z-Wave Products

Door / Window Sensor

The Aeon Labs Door / Window Sensor is a battery-powered Z-Wave magnetic door / window sensor with an extremely small form factor. The D/W sensor will send radio signals up to 6 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit.
Bidirectional mounting plate and push button allows for easy end-user installation.
The Aeon Labs Door / Window Sensor also has tamper prevention capabilities and low-battery alerts.

Z-Stick Series 2

The Aeon Labs Z-Stick Series 2 is a self-powered Z-Wave USB dongle with push button for remote network creation (independent from external power and host microprocessor). When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB.
This device is meant primarily to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technology protocol all the while simplifying Z-Wave network installation.

Z-Stick Lite

The Aeon Labs Z-Stick is a Z-Wave USB dongle. When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerlalAPI} through integrated USB. This devlce is meant primarily to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technoloqy protoco1 all the while simplifying Z-Wave netwwk installation.
Furthermore, the Aeon Labs Z-Stick is easily upgradeable by the end-user such that the latest Z-Wave protocols and commands are always available. It can be upgraded in field via its USB port which also serves as a charging port for its internal battery.

Minimote

The Aeon Labs Minimote is low-cost remote controller focused on end-user ease of use.
Although slmplicity and user experience is the primary focus, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface. The Minimote is upgradeable by the end-user such that the latest Z-Wave protocols are always available. An internal lithium battery allows for months of usage and is recharged via USB.

Home Energy Monitor

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. lt can wirelessly report immediate wattage and kWh usage to central control point gateways such as the 4HomeMedia CP and can be easily and safely installed by anyone.
Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring.
Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house. The main body is anchored using a back mount which opens to easily for battery replacement every 2 years.

Smart Energy Switch

The Aeon Labs Smart Energy Switch is a low-cost Z-Wave appliance switch which can report immediate wattage energy usage or kWh energy usage over a period of time. It can also be controlled by other Z-Wave devices to turn on/off to save electricity when appropriate.
With an unobtrusive small form factor, the Aeon Labs Smart Energy Switch will not block other nearby AC outlets. It is available in both matte white and matte black colors.

Smart Energy Illuminator

The Aeon Labs Smart Energy Illuminator is a low-cost Z-Wave lamp module which can illuminate/dim the lamp to varying degrees and can report immediate wattage energy usage or kwh energy usage over a period of time. It can also be controlled by other Z-Wave devices to turn on/off/dim to save electricity when appropriate.
With an unobtrusive small form factor, the Aeon Labs Smart Energy Illuminator will not block other nearby plugs. It is available in both matte white and matte black colors.

Multi Sensor

The Aeon Labs Multi Sensor is a battery-powered Z-Wave motion sensor, temperature sensor and lighting sensor all in one. The sensor will send radio signals up to 6 associated Z-Wave devlces within its own Z-Wave network when the sensor detects IR changes in front of its viewing window and can report current temperature and lighting levels in the immediate vicinity.
Indoor/Outdoor functioning tolerances allow the Aeon Labs Multi Sensor to function under weatherized conditions. Various sensitivity levels can be configured to avoid unintentional triggering from small animals such as cats and small dogs.



To check out more Aeon Labs Z-Wave products, click here!
 
CopyRight 2018 @ iuworld.net. iuworld.net - Infinite Ideas, Advance Lifestyle